DISCONTINUED
Reproduce the full dynamic impact of each bass note, and deliver clear, articulate bass through your subwoofers with maximum power and efficiency. RX1100.1 monoblock subwoofer amplifier drives 1,100 watts into 1 ohm.
- Class D Topology
- Power Rating: 800 Watts x 1 Channel @ 2-Ohms, 1100 Watts x 1 Channel @ 1-Ohm
- Dimensions: 11.75" L x 8.4" W x 2.0" H - 298mm L x 213mm W x 53mm H
Premium Build Quality for Ultra Performance
- Legendary Phoenix Gold massive unregulated power supply built for dynamic headroom and to drive low 1ohm impedance loads
- Audio Precision Quality Control Verification
Chassis Features
- Surface Mount Component Technology, double sided PCB
- High Level Inputs for easy OEM Integration
- Direct Insert Power and Speaker Terminals
- Remote Bass Level Control (RBC) port for connecting the remote subwoofer level control, which allows up to 20dB of volume adjustment and better control of the low pass signal
- RBCF (Flush-Mount Remote Bass Level Control) included
- RMD port allows you to add a remote monitoring display, giving you a visual of the voltage of your system
Total Control of Your Music Output
Variable filters on each channel allow you to fine tune your musical output to the precision you demand. All crossovers feature aluminum shaft precision potentiometers for exact crossover frequency selection.
- Low Pass Crossover Range of 30Hz to 300Hz, you get quality lower bass
- Subsonic Crossover Range of 10Hz to 55Hz to eliminate unwanted ultra low frequencies, improving the efficiency of your subwoofer
- Bass Boost 0 to +18dB
- Variable phase output can be adjusted 0 to 180 degrees. This adjustment can help achieve better “up front” bass, by enhancing your sub bass and mid bass transition and resolve subwoofer cancellation problems in certain installations. Resulting in tight, articulate bass that blends perfectly into the rest of your audio experience
Specifications
Frequency Response |
± 1dB from 20Hz to 300Hz |
Signal to Noise Ratio |
>90dB |
Low Pass Crossover |
12dB per Octave |
Subsonic Filter |
12dB per Octave |
Low Pass Crossover Range |
30Hz to 300Hz |
Subsonic Crossover Range |
10Hz to 55Hz |
Bass Boost @ 45Hz |
0 to +18dB |
Low Level Input Range |
200 millivolts to 8 volts |
Lowest Recommend Load |
1 Ohm |
Typical Efficiency |
80% |
Damping Factor |
Greater than 200 |
Variable Phase Adjustment |
0 to 180 Degrees |
RMS Power Output |
800w x 1 @ 2 ohms 1100w x 1 @ 1 ohm
|
Recommend Power Wire Fuse: 80a
Power/Ground Wire Size: 4 Gauge